Payment & Shipping Terms:
|Function:||Cutting Metal Plate||Cutting Range:||3m ( Customized )|
|Cutting Method:||Flame/Plasma||Cutting Thickness:||Plasma：Standard 2-14mm Depend On Plasma Source|
|Name:||CNC Plasma Flame Cutter||Feature:||Multi-torch|
cnc plasma flame cutter,
gantry cnc cutting machine
PLD Series Heavey Type Multi-torch CNC Flame and Plasma Cutting Machine
Multi-torch CNC cutting machine. The frame use gantry structure, bilateral drive to improve cutting quality. Host N Group front torch for longitudinal straight cut back a set of lateral torch for straight cuts, improve cutting efficiency. The machine can configure torch number, longitudinal and transverse cutting configured according to user needs, can be cut more once to walk one time.
1. This mode is suitable for the steel industry or make steel straight cutting relatively large amount of users.
2. Straight torch choice is based on the number of torch used steel straight cutting width and the minimum size to choose.
The machine can be made in front of CNC contour cutting back straight cutting multi-purpose function.
3. Machine frame is 8mm thick steel plate welded thicker than the other manufacturers, to improve the structural strength and enhance life. make sure the working stable and cutting precision
4. The front beam thickness is 20mm , one-time finished by large gantry milling machine,
increasing the surface high smoothness, Rail groove is also one-time finished by large milling machine, increasing the beam rail straightness and parallelism, to ensure the positioning accuracy.
5. Adopt hollow design: increasing structural strength, to remove the hard power and take away the heat when cutting and prevent the frame from deformation.
|Model||PLD Multi-Torch CNC cutting Machine|
|Cutting Range||3m (2350mm)|
|Machine Size||3 m (3500*2400*1800mm)|
Plasma:Standard 2-14mm depend on plasma source
|Flame Cutting Speed||20-700 mm/min|
|Ignition Mode||Automatic Ignition|
|Max Perforation Thickness||14mm|
|Max Edge Thickness||18mm|
|Plasma torch anti-collision system||Yes|
|Drive Mode||Stepper or Servo|
|Working pressure of compressed gas||Above 7Mpa|
|Working environment||Ventilation, no concussion|
|Power||5KW(not include plasma Power)|
|Gas Type||Acetylene Propane|
Remark: The parameter only for reference, the cutting range and machine size can be designed according to user’s requirement.
Contact Person: Gaven