Bt40 Spindle Bore Taper Steel Structure H Beam Cnc Drilling And Sawing Machine Line 5-30mm Drilling Diameter Range

BT40 Spindle bore taper Steel Structure H Beam CNC Drilling And Sawing Machine Line 5-30MM Drilling Diameter Range

Purpose of the production line:

This production line is mainly used for drilling, typing, sawing and cutting of H-shaped steel, channel steel and other steel.

The drilling host uses 3 BT40 high-speed spindles to drill the 3 faces of the steel. Each face has 1 spindle, and the corresponding row tool magazine can accommodate up to 4 specifications of tools. It can realize the conversion of CAD drawings into processing programs; and can realize multi-threaded synchronous operation, and can reasonably arrange drilling, workpiece operation, tool change, spindle positioning and other tasks, so that two or three of them can be completed at the same time, greatly improving production efficiency.

The sawing host uses a band saw to cut the steel to a fixed length.

This production line reserves a communication interface to facilitate customers' future system management of the production line.

Production line structure and configuration:

This production line consists of two major parts: drilling production line and sawing production line. The electrical part is also divided into two parts, which control sawing and drilling respectively. The two parts can be operated independently and can communicate with each other through the bus.

Components:

This production line is mainly composed of a loading horizontal material table, a 3D drilling main machine, a 3D drilling feed channel, a 3D drilling feeding device, a 3D drilling discharge channel, a cooling system, a hydraulic system, a pneumatic system, a lubrication system, an electrical system and other parts.

The production line adopts a fixed bed and a movable workpiece structure, which is convenient for automated production

1. Loading horizontal material table

It consists of a material table bracket, a conveyor chain, a reduction motor, etc., which is used to transport the steel to the feed channel.

The loading horizontal material table is connected to the straightening machine purchased by the customer.

2. Three-dimensional drilling feed channel

The three-dimensional drilling feed channel uses a power roller to connect to the straightening machine on the customer's site, accept the straightened profile, and automatically send it to the clamp position of the feeding trolley. The upper plane height of the roller in this scheme is 800mm from the ground. If the height of the straightening machine is different, the user should adjust it. The feeding channel is used to carry the workpiece to be processed. A photoelectric switch is installed at the front end of the channel to detect the front end of the workpiece and determine the processing reference in the X direction. The side push device presses the workpiece tightly and leans against the side positioning roller to achieve rough positioning of the workpiece in the Y direction.

Main Specifications: