Payment & Shipping Terms:
|Workpiece Size:||600x600mm||Spindle Taper:||BT40|
|Max.drilling Diamter:||Φ35 Mm||Max.thickness:||40|
|Spindle Speed:||30~3000 R/min||Servo Spindle Motor Power:||7.5kW|
CNC Milling and Drilling Machine Special for Processing Metal Flange Plate
The CNC gantry drilling and milling machine is mainly used for the drilling, chamfering, tapping, and milling of plate/structural parts with the thickness of flanges, discs, rings, plates and other workpieces within the effective range. Drilling through holes and blind holes can be realized on single material parts and composite materials. The processing process is digitally controlled and the operation is very convenient. It can realize automation, high precision, multiple varieties and mass production.
1. Equipment structure:
The equipment is integrally cast, mainly composed of worktable, fixed beam gantry, movable sliding saddle, drilling and milling power head, automatic lubrication device, protective device, circulating cooling device, digital control system, electrical system, etc. Rolling hard rail pair support and guidance, precision lead screw pair drive, the machine tool has high positioning accuracy and repeat positioning accuracy.
2. Fixed beam type gantry:
The gantry is made of gray iron (HT250). The front side of the gantry is equipped with two ultra-high bearing capacity rolling linear guide pairs, a set of precision ball screws and a servo motor to make the power head slide plate move in the Y axis direction , Drilling power head is installed on the power head slide plate. The gantry movement is realized by the rotation of the ball screw driven by the servo motor through the precision coupling.
3.Automatic lubrication device and protection device
This machine tool is equipped with Taiwan's original volumetric partial pressure automatic lubrication device, which can automatically lubricate various motion pairs such as guide rails, lead screws, racks, etc., without dead ends, and ensure the service life of the machine tool. The X-axis and Y-axis of the machine tool are equipped with dust-proof shields, and splash-proof baffles are installed around the workbench.
The laser interferometer is used to calibrate, and accurately check and compensate the pitch error, backlash, positioning accuracy, repeat positioning accuracy, etc., to ensure the dynamic, static stability and processing accuracy of the machine. Ballbar inspection Each machine uses a British RENISHAW company ballbar to calibrate the true circle accuracy and machine geometric accuracy, and perform circular cutting experiments at the same time to ensure the machine's 3D machining accuracy and circle accuracy.
|Workpiece size||LxW||600 x 600 mm|
|Gantry height||400 mm|
|Drilling power head||Qty.||1|
|Max.drilling diamter||Φ35 mm|
|Spindle speed||30~3000 r/min|
|Servo spindle motor power||7.5kW|
|Distance from the lower end of the spindle to the worktable||200-540mm|
Lateral movement of power head
|Max.horizontal stroke||600 mm|
|Lateral movement speed||0~9 r/min|
|Servo motor power for lateral movement||10N/M|
|Gantry longitudinal movement (Y axis)||Max. feed stroke||600 mm|
|Feed moving speed||0~9 m/min|
|Feed servo motor power||10N/M|
|Vertical ram feed motion (Z axis)||Max. stroke||400 mm|
|Moving speed||0~8 m/min|
|Servo motor power||1x2.4kW (Brake)|
|Three-axis positioning accuracy||X/Y/Z/A/B/C||0-0.02mm|
|Three-axis repeat positioning accuracy||X/Y/Z/A/B/C||0-0.01mm|
|Machine weight||/||About 3.5T|
|Overall size||LxWxH||2200x1600x2200 mm|
Contact Person: Gaven